CCNA Lab: Basic Router Configuration

CCNALabBasicRouterConfiguration thumb CCNA Lab: Basic Router Configuration

Tasks: Configure some basic router setting:

1. Router name.

2. Router passwords: console, vty, enable password, perform password encryption.

3. Serial interfaces, FastEthernet interfaces.

4. Interface description.

5. Login banner.

6. Make configuration changes.

7. Back up configuration files to TFTP servers.

Router A

Router>enable

Router#configure terminal

  • Router name

Router(config)#hostname RA

  • Router passwords

RA(config)#line console 0

RA(config-line)#password cisco

RA(config-line)#login

RA(config-line)#exit

RA(config)#line vty 0 4

RA(config-line)#password cisco

RA(config-line)#login

RA(config-line)#exit

RA(config)#enable password cisco

RA(config)#enable secret cisco

  • Serial interfaces, FastEthernet interfaces, interface description

RA(config)#interface serial 0/0

RA(config-if)#ip address 172.16.1.1 255.255.255.0

RA(config-if)#no shutdown

RA(config-if)#description This is Serial 0/0 on router A

RA(config-if)#clock rate 64000

RA(config-line)#exit

RA(config)#interface fastEthernet 0/0

RA(config-if)#ip address 192.168.1.1 255.255.255.0

RA(config-if)#no shutdown

RA(config-if)#description This is FastEthernet 0/0 on router A

  • Login banner

RA(config)#banner motd # Router Basic Configuration – www.CCNA5.com #

  • Make configuration changes

RA#copy running-config startup-config

Destination filename [startup-config]?

Building configuration…

[OK]

  • Back up configuration files to TFTP servers

RA#copy running-config tftp:

Address or name of remote host []? 192.168.1.3

Destination filename [RA-confg]? RouterA

Writing running-config….!!

[OK – 803 bytes]

803 bytes copied in 3.14 secs (0 bytes/sec)

 

Router B

Router>enable

Router#configure terminal

  • Router name

Router(config)#hostname RB

  • Router passwords

RB(config)#line console 0

RB(config-line)#password cisco

RB(config-line)#login

RB(config-line)#exit

RB(config)#line vty 0 4

RB(config-line)#password cisco

RB(config-line)#login

RB(config-line)#exit

RB(config)#enable password cisco

RB(config)#enable secret cisco

  • Serial interfaces, FastEthernet interfaces, interface description

RB(config)#interface serial 0/0

RB(config-if)#ip address 172.16.1.2 255.255.255.0

RB(config-if)#no shutdown

RB(config-if)#description This is Serial 0/0 on router B

RB(config-line)#exit

RB(config)#interface fastEthernet 0/0

RB(config-if)#ip address 192.168.1.2 255.255.255.0

RB(config-if)#no shutdown

RB(config-if)#description This is FastEthernet 0/0 on router B

  • Login banner

RB(config)#banner motd # Router Basic Configuration – www.CCNA5.com #

  • Make configuration changes

RB#copy running-config startup-config

Destination filename [startup-config]?

Building configuration…

[OK]

  • Back up configuration files to TFTP servers

RB#copy running-config tftp:

Address or name of remote host []? 192.168.1.3

Destination filename [RA-confg]? RouterB

Writing running-config….!!

[OK – 785 bytes]

785 bytes copied in 0.125 secs (0 bytes/sec)

Tags: ccna router configuration, basic router configuration, ccna lab configuration guide, ccna router configuration steps, router configuration lab, ccna router configuration commands, ccna basic router configuration, basic router configuration lab, cisco ccna router configuration basics, ccna lab configuration
  1. This helped me a lot . Thanks :lol:

Leave a Comment


NOTE - You can use these HTML tags and attributes:
<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>